Bish Enterprises

Harvest BOTH Hemp Seeds and Hemp Stalk!

• The Double Cut combine is suitable for harvesting hemp and other bast fiber crops.
• In one single stage the crop is divided into stalks, seeds and leaves (optional).
• The base of this machine is a conventional combine which can be rebuilt in one day so you can harvest corn, soybeans, wheat, sorghum, rapeseed, barley or other grain crops.
• More efficiency, 1 working phase system harvesting seed, stem and leaf

• Propriety cutting and feeding mechanism reduces or eliminates the wrapping issues that many headers encounter.
• Snoots lift branches to increase yield while leaving stalk
• Easy to change sickle-section design allows you to swap cut to use a more aggressive section for hemp, allowing you to get more life out of your knife components
• Backscreen reduces material loss, increasing bushel/acre yield
• Custom row-spacing available from 20″ to 60″ or wider

• First Row-Crop Header Designed for CBD Hemp Production
• Propriety cutting and feeding mechanism reduce or eliminate the wrapping issues that many headers encounter
• Snoots lift branches to increase yield while leaving stalk
• Easy to change sickle-section design allows you to swap out to use a more aggressive section for hemp, allowing you to get more life out of your knife components
• Backscreen reduces material loss, increasing bushel/acre yields
• Able to harvest narrow row drilled (7 ½”) crops as well as crops planted up to 40” apart

• The FIRST Header Designed to Harvest Hemp!
• Propriety cutting and feeding mechanism reduce or eliminate the wrapping issues that many headers encounter
• No overhead reel unit reduces wrapping, increasing yield
• Easy to change sickle-section design allows you to swap out to use a more aggressive section for hemp, allowing you to get more life out of your knife components
• Optional Backscreen with Plexiglass reduces seed shatter, increasing bushel/acre yields
• Able to harvest narrow row drilled (7.5″) crops as well as crops planted up to 40″ apart

Harvest Whole Plants to Pick the Buds!

This harvester is a tractor 3-point hitch mounted harvester designed to cut the stalk at near ground level, orient the stalk perpendicular to the direction of travel, and positively convey it by special “gripper” chain to a wagon or trailer which is pulled alongside the harvester. The self-contained hydraulic system is powered by the PTO of the tractor carrying the harvester.

Fiber Production

Growing hemp for fiber? We’ve got the attachment for you! This “Forage Harvester Windrow Attachment” mounts to a forage harvester, but doesn’t run the fiber through the harvester. This extended feederhouse allows your fiber stalks to be windrowed, without damaging the fibers or putting wear and tear on your harvester. Once the fiber stalks are in a windrow, they can undergo further raking and rhetting.

Your Best Friend at harvest time

You’ve harvested your hemp, marijuana, or hops and now you need to strip the plant. Whether it’s buds for producing CBD oil, primo buds for the smoker, or hops buds for craft brewing the BUDD EZ can give you results that reduce your labor costs and increase production.
The BUDD EZ is designed to increase the efficiency of the debudding process. The stems of either freshly harvested or dried material are fed into the machine. The holes in the plate are sized to only allow the stems to pass through. Rollers pull the stems through the plate and the leaves and buds are cleanly stripped off and fall into a collection bin. The stems are also collected in a bin on the other side of the machine. The catch drawer receives all the shake, SO NOTHING GOES TO WASTE.

Bish Hemp Separation system

The #1 way to separate flower from the stalk and seed of WHOLE DRY HEMP PLANTS! Run up to 1 Ton of material per hour!  This Hemp Thresher by Bish Enterprises will make processing hemp easier than ever! With a continuous flow conveyor, your production facility can operate 24 hours a day, 7 days a week!

Harvest BOTH Hemp Seeds and Hemp Stalk!

• For hemp leaf – hemp flower & hemp fiber production
• This system combines the action of a stripper header system and the use of a a forage harvester to harvest the fiber and leaf in one pass
• This machine is based on a Claas Forage Harvester (other makes and models can be converted) that has the stripper header mounted on forward “arms” that allow for height adjustment
• The seed and leaf structure is stripped off of the plant and conveyed to the bin system
• Fiber that is cut nicely laid down in a row between the wheels of the combine

Pull Behind Multi-Height Sickle Mower for Hemp Fiber

Cut hemp stalks into 30” sections for easy​…

• Retting​
• Baling​
• Bale unwinding​
• Decortication​

Worlds first portable decorticator

• Ideal for small scale operations
• Robust, all steel construction
• Designed for a single operator
• American made!

History