Cutterbars
Easy Cut II
Despite all technological advances around the combine and platform, the cutting system is still the first part to touch your crop and determines your harvest success. Based on this fact, we developed a superior cutting system with state of the art technology and quality.
SCH roller guides: reduce friction, wear, and cost.
The width of combine platforms has increased substantially in the past years. Therefore, the total of the frictional forces has increased dramatically.
With the use of roller guides, we greatly improved the cutting system.
Change your cutting system to a Schumacher Cutterbar! …it’s just that easy to fill your grain tank.
Easy Cut II Guard
In the last decades, two types of double guards became dominate in the market: the forged guards and the Schumacher steel guard.
What makes the SCH Easy Cut steel guard so special? The SCH Easy Cut guard is manufactured using a special alloy steel. A subsequent special hardening process gives the guard extremely high hardness, durability, and wear life.
Another advantage is the much higher vertical and lateral strength of the guard. No guard lips break off; guards don’t bend.
The angled cutting edges of the guard hold the crop material better, resulting in a cleaner cut and a better flow of the material. This also results in less power needed to cut the material.
- Quality spring steel material
- Special hardening for extremely hard & wear resistant surface, resulting in long wear life
- Features two cutting edges
- Bolted top & bottom gives protection from impact from all sides
Easy Cut II Pro Cut Section
Stones and dirt are tough on knife sections. They not only increase section wear but can also damage other parts of the platform. Knife section quality is therefore of extreme importance.
Schumacher Pro Cut knife sections are completely thru-hardened, therefore extremely tough.
They don´t bend; they break. Therefore, when hitting large stones or other objects, damage to guards is eliminated which is not the case with regular sections.
The sections are fastened to the knifeback with a special serrated bolt and a flange nut. The conically shaped and serrated body of the bolt locks tightly in the section and knifeback hole. A tight and secure connection is the result. At the same time sections can be quickly changed.
- The advantages of the SCH Pro Cut knife section:
- Completely thru-hardened
- Does not bend; it breaks, therefore no guard damage
- Mounted one up/one down, creating a balanced cutting force
- Easy to replace secure bolt and nut connection
- Various serrations available
Easy Cut II Sectionalized Knife
Today platforms are 30 feet or wider. Knife assemblies in one piece are very difficult to handle and transport. The SCH sectionalized knife assembly eliminates this problem.
Our sectionalized knife assemblies are made up of individual sections. The longest single section is a little less than 9 feet long and can be transported in a car or shipped by courier.
A special connector bar joins the pieces fast and securely.
SCH Easy Cut sectional knife assemblies have only bolted sections. This also makes for a quick and easy replacement of individual knife sections or whole knife assembly segments. This is cost effective, and the individual parts are easy to replace.
The advantages of the sectionalized knife assembly:
- Fast and secure connections
- Quick and easy replacement
- High strength connector
- Economical and fast shipping
Easy Cut II Roller Guide
The width of combine platforms has increased substantially in the past years. Therefore, the total of the frictional forces has increased dramatically. With our roller guide system, we greatly improved the cutting system. Almost all SCH Easy Cut systems can be updated with roller guides.
Top Roller Guide
- Holds knife straight to prevent section from tipping downwards
- Protects sections and guards against wear
Bottom Roller Guide - Replaces the need for wear plates
- Less friction, less vibration, less wear, and reduces power requirements
Easy Cut II Sectionalized Knife
Today platforms are 30 feet or wider. Knife assemblies in one piece are very difficult to handle and transport. The SCH sectionalized knife assembly eliminates this problem.
Our sectionalized knife assemblies are made up of individual sections. The longest single section is a little less than 9 feet long and can be transported in a car or shipped by courier.
A special connector bar joins the pieces fast and securely.
SCH Easy Cut sectional knife assemblies have only bolted sections. This also makes for a quick and easy replacement of individual knife sections or whole knife assembly segments. This is cost effective, and the individual parts are easy to replace.
The advantages of the sectionalized knife assembly:
- Fast and secure connections
- Quick and easy replacement
- High strength connector
- Economical and fast shipping
Standard Croplifter
Schumacher Croplifters
- Made of high quality spring steel
- Available to fit most North American guards
- Used in all small grain crops, canola & milo
- New generation lifters offer less wear on bottom runners (ASK)
- Simple on and off mounting
ASK Croplifter
- Schumacher’s ASK croplifter is the world’s leading standard croplifter.
- Schumacher stands for 45 years of experience and presence on five continents.
- Original Schumacher products are used every day throughout the world.
Why Schumacher croplifters last longer:
LEARN MORE
- Because the gently curved bottom runner takes the pressure off the riveting at the mounting module. The first rivet of the mounting module sits on the curved part of the skid so it has less ground friction and lasts longer.
- The concave sliding skid improves sliding dynamics. Wear shows at first only in the middle part. The croplifter lasts longer.
- SCH stamping stands for high quality material used by Schumacher manufacturing to ensure long wear life of the sliding skid.
- SlimProfile – the closed finger profile prevents the reel tines from getting caught while reversing.
- Types:
- Various attachment dimensions for a precise fit
History
In 1976, Harv Bish opened the doors to Harvs Farm Supply in the same location Bish Enterprises is today. Harv had a simple goal in mind – to help solve complicated issues farmers face with easy, inexpensive solutions. Years later, that’s still the goal we strive to achieve on a daily basis.
The current owner and CEO, Brad Bish, and his wife, Christy Bish, jointly purchased Harvs Farm Supply from their father in 1997. They went on to build the company we know today as Bish Enterprises.
We are famous worldwide for our Header Adapters, all of which are designed and fabricated here in Giltner, NE. Additional products we’re known for are the “Bish” branded harvest accessories, SuperCrop Row-Crop Header, “Bish Built” Custom Corn Heads, Row Crop Heads and Frame Kits, Corn Reels, Drive Kits, and much more!
We also offer the ORIGINAL “Bish Head Changer,” custom built heads from 20” to 40” row spacing, and are even a Brent grain cart dealer. You won’t find a larger selection of corn heads or row crop heads in non-stock row configurations anywhere else!
